{"id":3452,"date":"2023-05-26T10:03:58","date_gmt":"2023-05-26T04:33:58","guid":{"rendered":"http:\/\/digitalmarketingexpert.info\/?page_id=3452"},"modified":"2023-06-07T14:37:00","modified_gmt":"2023-06-07T09:07:00","slug":"pressurised-condensate-recovery-module-pcrm","status":"publish","type":"page","link":"https:\/\/thermodyneboilers.com\/demo\/oldthermo\/pressurised-condensate-recovery-module-pcrm\/","title":{"rendered":"Pressurised Condensate Recovery Module (PCRM) : Introduction & Benefits"},"content":{"rendered":"

Pressurised Condensate Recovery Module:\"\"<\/a><\/b><\/h2>\n

The Pressurised Condensate Recovery module<\/strong>\u00a0offers energy savings water treatment costs, and it also calculates possible savings.<\/p>\n

\"Pressurised
\u00a0 \u00a0 \u00a0 \u00a0 \u00a0Pressurized Condensate Recovery Systems<\/em><\/strong><\/figcaption><\/figure>\n

In this environmentally conscious world we always look forward to securing and reusing the most amount of energy.<\/span>\u00a0Returning the maximum amount of condensate back to the\u00a0boiler will give<\/strong>\u00a0the highest ROI on investments through reducing maintenance and energy costs.<\/span><\/p>\n

\"Condensate<\/p>\n

The pressurized system is also able to provide an impressive increase in\u00a0Boiler’s efficiency of operation<\/strong><\/a>.<\/p>\n

Steam is mostly created by the following factors<\/span> \u00a0 \u00a0 \u00a0 \u00a0<\/strong><\/p>\n

If 1 kg of steam is completely condensed, 1 kg condensate forms at the same temperature and pressure.<\/span>\u00a0The steam that is saturated, when it enters the process, loses its heat stored in the latent state that is a significant portion of the heat it holds.<\/span>\u00a0The rest of the heat contained in the steam is stored in the condensate and is referred to as sensible heat.<\/span><\/p>\n

The condensate is now delivered into Boiler\u00a0Boiler<\/strong>\u00a0together with the water that comes via the feed pump. As a result, the total temperature of water that is entering to the\u00a0Boiler<\/strong>\u00a0shell is much higher than that of the water without condensate recovery. Boiler’s efficiency of operation<\/strong><\/a>.<\/p>\n

To generate steam the total energy demand of the water is reduced which results in less energy consumption and consequently savings that are compounded each year.<\/p>\n

\"pressurized<\/a><\/p>\n

Saturated steam is used for heating to gives up its latent heat, which is a too large proportion of the total heat its contents. The remainder of the heat in the steam is retained in the condensate as sensible heat in fig.<\/p>\n

\"pressurized<\/a><\/p>\n

Pressurised Condensate Recovery Module (PCRM)<\/strong> is also a unique system wherein the condensate generated from your process is fed back under pressure directly to the boiler, unlike any other conventional condensate recovery system<\/strong> where the condensate is discharged at atmospheric pressure.<\/p>\n

Also by reducing the amount of fresh makeup water entering the Boiler<\/strong><\/a>, reduces the amount of water treatment required. Condensate being distilled in quality (almost no TDS) also reduces the Blowdown frequency, again operational cost savings.<\/p>\n

It also prevents<\/h4>\n

Unstable temperature control, Product quality problems, Excessive corrosion of heating surfaces, Water hammer, Noisy operation, Equipment damage.<\/p>\n

So, it can be concluded that the Pressurised Condensate Recovery Module<\/strong> is an all-around energy saver with an amazingly short payback period.<\/p>\n

Advantages of PCRM:<\/b><\/h2>\n

Our Pressurised Condensate Recovery Module system<\/strong> serves you the following advantages:<\/p>\n